Tool Sets
Technical Data
Tool Start Set, 4 – 6 mm*
10 parts, 4 resp. 6 mm shank diameter
1 graver (90°/0.20 mm)
1 engraver’s milling cutter (60°/0.50 mm)
4 single tooth cutters Varius® (1 x 3.00 mm; 1 x 4.00 mm; 1 x 5.00 mm; 1 x 6.00 mm)
3 single tooth cutters with polished flute (1 x 6.00 mm; 2 x 4.00 mm)
1 router bit (long hole slot cutter: 16.00 mm)
Tool Start Set, 3 mm*
20 parts, 3 mm shank diameter
5 gravers (1 x 15°/0.30 mm; 1 x 36°/0.20 mm; 1 x 36°/0.40 mm; 1 x 60°/0.20 mm; 1 x 90°/0.20 mm)
1 engraver’s milling cutter (60°/0.20 mm)
4 single tooth cutters Varius® (1 x 1.00 mm; 1 x 2.00 mm; 2 x 3.00 mm)
2 single tooth cutters with polished flute (2 x 3.00 mm)
2 single tooth cutters with hawk beak profile (2 x 3.00 mm)
6 double tooth cutters with fishtail (2 x 1.00 mm; 2 x 2.00 mm; 2 x 3.00 mm)
Tool Start Set Electronics*
20 parts, 3 mm shank diameter
2 gravers (2 x 36°/0.20 mm)
5 double tooth cutters with fishtail (3 x 2.00 mm; 2 x 3.00 mm)
6 isolation engraving tools
4 rub out cutters (2 x 0.50 mm; 2 x 1.00 mm)
3 GRP/CRP cutters (1 x 1.00 mm; 1 x 2.00 mm; 1 x 3.00 mm)
Drill Set (Electronics)*
50 parts, 3 mm shank diameter
4 x each diameter 0.50 – 1.00 mm, 2 x each diameter 1.10 – 1.50 mm, 1 x each diameter 1.60 – 2.90 mm, 2 x 3.00 mm
* The dimensions indicate the cutting edge diameter (in case of the gravers also the top angle). For more detailed information concerning the tool geometries, please see our separate tool catalogue. There you will find also tools for re-ordering and tools which are not included in these sets.
Suitable Machine Lines
These tool sets contain collections of commonly used high-quality carbide tools from our extensive assortment for different kinds of applications. Please visit also our separate tool shop, respectively see our tool catalogue for details, sizes, cutting edge geometries, etc.
A tool set is an ideal basic equipment, so that you will be prepared for the majority of cases without having to study too much technical data of tools. When we deliver a complete CAM system, you will also get an introduction in the proper use of the tools, i. e. which tool has to be used for which kind of material and which is the proper rotational speed or feed rate. In the vhf manufacturing software, these parameters have already been pre-set.
|
|
Tools from vhf: great selection, high quality and a long endurance. |
