Rotary Axis for Profiles
Technical Data
|
Rotary axis steplessly rotatable by motor drive |
|
|
Stable construction with rigid main beam; for heavy workpieces and very long workpieces which would possibly bend in a tailstock unit |
|
|
T-slot fixing area on the main beam for fixing clamping devices |
|
|
Length of T-slot fixing area up to 6,000 mm, as a special design even greater lengths possible |
|
|
Usage of clamping devices, pneumatic fixing devices and hand-lever fixing devices |
Requirements
|
|
Basic system of the Active Pro or Premium line with an appropriately increased passage height |
|
|
Mountable adjacent to special vacuum table, T-slot mounting area or plane aluminium surface |
|
|
Controller CNC 980+ with 5 axes |
Suitable Machine Lines
Do You Want an Offer?
Here are lots of different implementations possible, so please ask us for an individual offer.
Profile bars of different shapes made of metal, plastics or wood often have to be processed from more than just one side. Using this special rotary axis, you can machine your profiles from three sides without having to re-chuck them – even next to your regular machining area (vacuum or T-slot table). Your material will be supported by a stable main beam. The axis itself can be steplessly rotated. However, typically it will be rotated – depending of the type of the profile material – in fixed angles of 45 or 90 degrees.
|
|
Detail view of a rotary axis for profiles, based on type XL, with T-slot fixing area on a Premium system. |
So diversified as your profile material may look, so universally we may design your rotary axis: the cuboidal main beam which is available with a length of up to six metres already in the standard program has T-slots on all sides. So you can fix or move all necessary clamping devices for your profiles without much effort. For instance, the clamp levers which are shown in the picture are available in many different sizes (in our example for profiles up to 60 x 120 mm). In addition to this you can also mount pneumatic fixing devices and hand-lever fixing devices. Whether you can drill, mill, engrave, chamfer or cut threads into your material depends only on the other equipment of your CAM system.
|
|
Special design of a CAM 1040 Active Pro with rotary axis for profiles and a T-slot fixing area on 3,800 x 200 x 100 mm and 4 special clamping units for profiles of up to 60 x 120 mm. |
