http://www.vhf.eu/en/Machines/FixingDevices/T-SlotFixingAttachmentSet
T-Slot Fixing Attachment Set
Scope of Delivery
Manual T-slot Fixing Set
|
4 clamps |
|
|
2 hand-lever clamping devices |
|
|
6 fixation bars (length: 125, 175 and 225 mm) |
Pneumatic T-slot Fixing Set
|
|
2 pneumatic clamping devices SP 1 |
|
|
2 pneumatic clamping devices SP 2 |
|
|
Pneumatic accessories for connection to the compressed air supply |
Stop Rails for Front Clamping Range
|
|
Set of lower and front stop rail |
For Re-orders
|
|
Fixation bars |
|
|
Hand lever clamping devices |
|
|
Clamp |
|
|
Pneumatic clamping devices SP 2 (left) and SP 1 (right) |
For fixing the workpieces directly over the T-slots of the machine’s working table, there are different sets which contain manual and pneumatic fixing devices. The sets (see scope of delivery) are assembled of the following components:
The clamps press the workpieces with high force on the working table. The clamping height can be adapted to the height of the workpiece by an adjusting screw.
The hand-lever clamping devices achieve with a hand force of 100 N a clamping force of up to 2,000 N. By exerting the hand-lever, the clamping jaw will be extended and presses the workpieces horizontally against the fixation bars.
The fixation bars in three different lengths can be arranged freely on the working table. They help you to fix your workpieces equally and quickly.
The pneumatic clamping devices are available in two variants which distinguish themselves by their size and clamping force. They are especially suitable for a serial production of the same workpiece type. For technical details of the pneumatic clamping devices see our
|
|
A housing is fixed with two pneumatic clamping devices SP 1 in the front clamping range of a Premium system. |