http://www.vhf.eu/en/Machines/MachiningUnits/OscillatingCuttingHead
Oscillating Tangential Cutting Head
Technical Data
|
Moveable lance, automatic justification into cutting direction |
|
|
Lance oscillation electrically powered |
|
|
For absolutely burr-free cutting tasks, also in thicker materials, optimally suitable e. g. for model making, sign making, packaging technology, industry, ... |
|
|
For working on wallpapers, carpets, balsa wood, cardboard, rubber materials (sealings, mats), foamed plastics, many typical sign making materials (PVC foam, polystyrene, Kapa®, composite materials, capillary plates), textile fabrics, leather, sandblast foils, pool foils, truck tarpaulins, ... |
|
|
Optionally available with quick-change fixture for a quick exchange of spindle and cutting unit |
|
|
60 Hertz oscillation frequency (~ 3,600 strokes per minute) |
|
|
Lift approximately 5 mm |
Optional
|
|
Model with 100 Hertz oscillation frequency (~ 6,000 strokes per minute) |
|
|
Lift approximately 4 mm |
Scope of Delivery
|
|
Oscillating tangential cutting head incl. additional axis card for CNC 580+ respectively CNC 980+ |
|
|
Electric cables |
|
|
Lance |
For Re-orders
Suitable Machine Lines
It is much better to cut some materials like foam rubber, cardboard or composite materials with an oscillating knife into the requested shape than to mill them with a rotating tool. In this technique a thin carbide lance moves up and down with high speed. So it becomes possible to work on much thicker materials than just on film. Especially when cutting soft materials or materials which tend to fray easily, you get burr-free and clean-cut edges of cut. You will get absolutely precise results because the lance is being adjusted automatically into the cutting direction.
The oscillating tangential cutting unit is electrically powered and has – depending on the model – an oscillation frequency of 60 Hertz or 100 Hertz. This equals approximately 3,600 strokes respectively 6,000 strokes per minute. The thickness of the materials which you can cut depends only on the length of the lance (up to 75 mm). So the oscillating tangential cutting head is suitable for working on most common materials.
|
|
Oscillating tangential cutting head, mounted with quick-change fixture. |