vhf News and Press Releases
We have assembled current announcements and press releases of vhf on this site. Reproducible product pictures can be found on the particular pages. If you have any questions, please contact our public relations department.
vhf camfacture AG has thoroughly reworked and expanded their range of single tooth cutters. Although some rarely requested intermediate sizes had been phased-out, the choice of meanwhile 120 different single tooth cutters represents an increase of about 30 percent compared to the current catalogue 2008/2009.
PR 2009-16 of 27.11.2009
vhf camfacture AG offers a new special tool for bending aluminium composite plates which are quite commonly used in the fields of sign making, exhibition and store construction. These plates are also known under their brand names Alucobond® or Dibond®.
PR 2009-15 of 12.08.2009
At the viscom trade fair which takes place from 1 to 3 October 2009 in Düsseldorf, Germany, vhf will present two large-scale CNC machining systems. Both have a positioning range of 2 x 3 metres and are based on CAM 2030 Active Pro. They show different kinds of applications from the sign making sector.
PR 2009-14 of 07.08.2009
New triple tooth cutters with a special cutting edge geometry for machining different kinds of foamed materials complete vhf’s scope of tools. They have a free grinding of up to 85 millimetres which makes it possible to process the workpiece with the appropriate dipping depths.
PR 2009-13 of 03.08.2009
Due to the especially long free grinding, finest details can be milled at high dipping depths. For machining different kinds of materials, this tool is available with variously optimised cutting edge geometries.
PR 2009-11 of 27.07.2009
From now on, a combined working cycle of folding and cutting materials like cardboard or paperboard becomes possible with a new folding device of vhf camfacture AG. It can be mounted next to the cutting head at the z axis and be operated at the same time.
PR 2009-10 of 24.07.2009
vhf camfacture AG has further extended their scope of carbide lances for the use in oscillating tangential cutting heads. From now on, there are also much more narrow variants with just one cutting edge available.
PR 2009-09 of 21.07.2009
A common annoyance – a workpiece has been elaborately printed and then the contours will not be hit exactly when the workpiece is milled later on. In the worst case, the whole plate has to be discarded then. Reasons for this are inaccuracies of the printing process and while manually adjusting the workpiece on the CNC machining system. The new module Cenon CCD offers a remedy here by optically measuring the printed workpiece.
PR 2009-08 of 16.07.2009
vhf’s single tooth cutters with hawk beak profile which are especially developed for aluminium processing are optionally available with the high performance coating AluSpeed® from now on.
PR 2009-07 of 13.07.2009
